High temperature galvanized steel Baghouse cages for power plants
The galvanized steel Baghouse cages introduce:
The galvanized steel Baghouse cages is an accessory of pulse bag filter. It is formed by one-time welding with special equipment, and has the characteristics of firm welding and smooth and straight appearance.
The galvanized steel Baghouse cages is an important part of the dust collector. It is the "rib" of the dust filter bag. It should be light and easy to install and maintain. The quality of the filter cage directly affects the filter state and service life of the filter bag. The key to the dust collector is to clean the dust, and the cleaning effect determines the success or failure of the dust bag cage and even the entire dust collector.
Galvanized steel Baghouse cages process:
Pickling: Hydrochloric acid pickling is a widely used rust removal process. The lower the mass fraction of hydrochloric acid, the longer the pickling time, and the temperature of the pickling has a greater impact on the pickling time. Washing is a very important part of hot-dip galvanizing. Iron ions are brought into the zinc pot from the surface of the iron parts, resulting in excessive production of zinc ash and zinc slag, so the washing must be careful.
Flux: Flux is an important link. It can not only make up for the deficiencies of the previous processes, but also activate the surface of the steel and improve the quality of galvanized. have a great impact.
Drying: Immerse the part in the flux and then lift it out, drain the amine solution, and put it on the drying kang. If it is put into the pot too early, it will cause zinc explosion, and too late will cause leakage plating.
The galvanized dust filter cage dust removal framework technical requirements:
1. The galvanized steel filter cage must have sufficient strength, verticality and dimensional accuracy.
2. Galvanized steel filter cage table is galvanized.
3. All welded joints of the galvanized steel filter cage are good, and no de-soldering and welding leakage are allowed.
The galvanized dust filter cage Specifications:
| Type | Number of
longitudinal threads | Diameter of the longitudinal wires | Ring wire diameter | Material |
| Round Filter Cage | 6~24
10, 12, and 20 vertical wires most common | 3~6mm
10, 11, and 12 gauge wire most common | 86~190mm
Common diameters: 4″ – 6-1/8″ | Aluminum,
S235JR,
Galvanized Steel,
201,
SS 304,
SS 316,
ABS,
Carbon/Mild Steel,
Epoxy Coated (High Temperature <325°) |
| Oval Filter Cage | 6-8-10--16 | 3~6mm
10, 11, and 12 gauge wire most common | |
| In addition to the above information, we also need your quantity, length, Distance of rings, collar and venturi condition. If you have drawings, we will produce according to the drawings. |
Baghouse Cages Tops: Rolled Flange (Turned Down Flange),Split Collar (Rolled Band),Slotted,All Wire,Split Ring,Collar venturi.
Baghouse Cages Bottoms: Welded Cup,Crimped Cup,Snap Cup,Wire Formed.
Our factory:
Product Tags:
|
|
Galvanized Steel Baghouse Cages , Power Plants Filter Cage Manufacturer Images
|
